Last Updated on September 18, 2022 by Admin Wells
Painting the outside of your Toronto home, whether professionally or on your own, is a difficult task. To achieve the greatest outcomes, it is a process that necessitates precision and some amount of professionalism. The ideal curb appeal will be easy to accomplish with sufficient work.
There is always delight in the outcome when a painter applies exterior brick paint flawlessly. If it’s a house, it’ll get a new look and that extra “pop” it needs to stand out in the area. However, getting such results is not an easy task, and it necessitates being aware of the following common blunders. Never move forward with any drywall installation company without a signed service contract that lists all of the details of the project.
Common Mistakes to Avoid for Brick Painting
Here are some common mistakes to avoid when it comes to exterior brick painting Toronto:
No cleaning at all in the area
Next on the list of dangerous blunders that a person may make while trying to paint their brick home outside is failing to clean the area where they will be painting.
The thing to remember with home exteriors is that whatever is in the area when you’re painting has a decent potential of making its way onto your house exterior, depending on how well the grounds are protected.
You will be doing your painting job a favor by cleaning the area because there will be less likelihood of these objects ending up on the surface of your paint work.
Leaving the old paint on
Paint removal from masonry is a difficult (and occasionally impossible) task. You can’t just sand paint off brick like you can wood or other materials. You’ll need some strong chemicals, and even then, the paint might not come off completely. In other words, when doing exterior brick painting Toronto, there are no “second-takes”.
Because brick painting is essentially permanent, you must be certain of your colors and finish. There is no going back to natural brick after painting the interior or exterior brick.
Choosing the incorrect color
One of the most common painting blunders is choosing a paint color based on a color chip before even picking up a brush. It’s something we’ve all done. You choose a good color from the store’s color chart and place your order for paint. However, when you apply the paint to your walls at home, it does not appear to be the color you chose.
Always ask the paint store to mix a small sample of paint that you can take home and try out on the wall to avoid this error and get a true picture of what the paint will look like.
Not eliminating the mold
When it comes to painting the brick outside of a home, one of the most common mistakes people make is failing to take the time and effort to remove any mold that may be present.
Though some would have you believe that there is nothing wrong with leaving the mold on and that having even a small amount of mold on the exterior of your home is no big deal because you’ll be painting anyway.
This is not the case, and you should be aware that all you’re really doing is setting yourself up for a long-term failure. Make the effort to remove the mold, and you’ll notice that the paint job will look much nicer as a consequence.
Using low-cost paint
Almost everyone has dealt with cheap paint on a structure. If the paint’s quality, composition, and mixing are poor, it will struggle to endure the effects of harsh weather.
For example, a cheap, insufficiently strong paint will not hold up when it rains heavily. It will erode down the wall, leaving unsightly patches behind. When the sun is too hot, the paint may not keep up as well. However, you may avoid such problems by making sure you only choose the best paint selections.
To paint brick, not using solid paint colors
It’s also possible to paint brick with a solid hue. When doing exterior brick painting Toronto, using a solid color gives you more possibilities for the style you desire for your home. Paint the brick the same color or within the same color family as your walls if you want it to fit in with the rest of the room.
Painting the bare substrate
Painting on a bare substrate, whether stucco, wood, brick, or aluminum siding, almost invariably results in paint failure. Always use an adequate primer before applying the actual paint. A primer aids in the adhesion of the paint to any surface.
Not using the correct equipment and materials
Having the correct equipment on hand will make the process go lot smoother and easier, just like any other job. Make sure you have a sprayer or roller that can cover a broad area in a single pass. A sprayer is recommended.
This will save work time, making it easier to get into all of the joints, and make everything easier in general. However, spray from all sides to ensure that the paint reaches all of the nooks and crevices of the brick. If you have over grouted joints, this is extremely crucial.
Safe yourself from making these blunders by hiring professional home painters Toronto.